HP Notebook Computer and Mobile Workstation Battery Safety Recall and Replacement Program

Battery Safety Mode / Bios Update Information

HP released a BIOS update in August 2019 that includes batteries added by the program expansion. The updated BIOS places the battery in "Battery Safety Mode" so that the notebook or workstation can be safely used without the battery by connecting to an HP power adaptor. Batteries affected by this recall should immediately be put into "Battery Safety Mode".

Battery Safety Mode is only applicable to HP products affected by this recall. If the validation process identifies a battery as being eligible for replacement, the BIOS update should be applied and the system should be rebooted. During the reboot process, an option will be presented to enable Battery Safety Mode. Accepting Battery Safety Mode causes the battery to discharge and to cease future charging until Battery Safety Mode is disabled. HP strongly recommends accepting Battery Safety Mode so that the notebook or mobile workstation can be safely used by connecting to an HP power adaptor.

Select the HP Software and Driver Download Page below. Enter your product name, then scroll down to the BIOs section and select the + sign. Download the most recent HP Notebook System BIOS Update then install.

The following instructions apply to all affected products except HP 11 Notebook PC.
1. When your installation completes follow the instructions to restart your computer.
2. After your computer reboots you will see the screen below - you will need to accept Battery Safety Mode.
3. After Battery Safety Mode is accepted your screen will go black and the power LED will blink for up to 30 seconds while the unit is restarting. If the black screen and blinking LEDs are seen for longer than 30 seconds you should hold down the power button for 20 seconds and release for a full shutdown and power-up.
4. You will be required to use your HP Power Adapter after accepting Battery Safety Mode.
5. When your new battery is installed and system restarted, the BIOs will detect your new battery and disable battery safety mode, your notebook can now be powered using the replacement battery.

White paper for battery safety mode(EN)